add wifi to nard

[Ronny Nilsson]

Hello
It probably can, with some tweaking. Try something like this:

$ echo 'wlan0proto="disabled"' >>/etc/settings/network
$ hotplug
$ echo 'wlan0_ssid="xxxxx"' >>/etc/settings/network
$ echo 'wlan0proto="dynamic"' >>/etc/settings/network
$ hotplug

The file /etc/settings/network is a runtime copy of the /boot/settings/network 
it's refreshed every boot.

/Ronny


------------------------------------------
> thanks James and Ronny I'll try that.
>
> I need the end user to configure the wifi from an AP in the RPI.
> This can be changed in execution?
>
>
> Sebastián
>
>--------------------------------------------
>
> rln-nard at arbetsmyra.dyndns.org> wrote:
> > Hi Sebastián
> > You should enter your SSID and password in the file /settings/network in
> > the
> > SD-card (mounted as /boot/settings/network). The file is well documented
> > and
> > easy to follow. In the bottom of the file are:
> >         wlan0_ssid=""
> >         wlan0_psk=""
> > which you should edit. Then reboot the Pi. Hopefully it'll all work.
> > Monitor
> > the system log (with "logread" for problems.) The standard WiFi
> > tools "iwconfig" and "iwlist" are available for trouble shooting as well.
> >
> > However, for using Raspberry Pi 3 I recommend the development version of
> > Nard,
> > which has better Pi 3 support than v1.00.
> >
> > /Ronny
> >
> >
> >
> > -----------------------------------------
> >
> > > All the kernel drivers for wifi are loaded in the default kernel.
> >
> > Assuming
> >
> > > you're using supported hardware, you just need to configure
> >
> > wpa_supplicant
> >
> > > to connect to your access point.
> > >
> > > I had a lot of difficulty with wpa_supplicant. I took some careful
> > > notes about what I did to get it working, but I don't have them in
> > > front of me right now. I'll send them your way when I get home from
> > > work.
> > >
> > > - James
> > >
> > > -----------------------------------------
> > >
> > > > On Oct 6, 2016, at 9:46 AM, Sebastián Sáez <otrab86 at gmail.com> wrote:
> > > >
> > > > Hi!,
> > > >
> > > > I'm trying nard. Thanks Ronny by this development.
> > > >
> > > > I have a raspberry pi 3 and I would like to add wifi. Is there any
> > > > tutorial-tips to do this?
> > > >
> > > > regards,
> > > > Sebastián
> > > >
> > > > --
> > > > Sebastián