Nard Digest, Vol 25, Issue 2

[Ronny Nilsson]

Hi Michiel
Could you try this image in you RPi 3B?
http://www.arbetsmyra.dyndns.org/~rln/nard-devel-161118.img.gz
At least it's working fine on my device. But any help with testing is welcome.

/Ronny



------------------------------------------
> Hello
> This is a bit strange. I'm thinking of creating a devel branch example
> image which is known to work. Then you could perhaps try it?
>
> /Ronny
>
>
> -----------------------------------------
>
> > Hi Ronny,
> >
> > After further testing it still won't show up in the network. I've added
> > a static IP and a small program to toggle a GPIO pin which I monitor
> > with a scope. But it still won't show up or do anything with the GPIO
> > pin. The ethernet LEDs are lit and it looks like ethernet should work
> > (one of the LEDS flashes if I probe the network) but it doesn't.
> > The status LED (next to the SD-card) flashes about once every second
> > and my SD-card is still readable by a normal computer, so no broken
> > image at least.
> > Not sure how to continue, for now I'll work with the master branch and
> > I guess I'll figure out how to add the serial port. Maybe you can point
> > me in the right direction how to add the serial port.
> >
> > Thanks so far,
> > Michiel
> >
> > On Sat, 12 Nov, 2016 at 12:00 PM, nard-request at arbetsmyra.dyndns.org
> >
> > wrote:
> > > Send Nard mailing list submissions to
> > > 	nard at arbetsmyra.dyndns.org
> > >
> > > To subscribe or unsubscribe via the World Wide Web, visit
> > > 	http://www.arbetsmyra.dyndns.org/mailman/listinfo/nard
> > > or, via email, send a message with subject or body 'help' to
> > > 	nard-request at arbetsmyra.dyndns.org
> > >
> > > You can reach the person managing the list at
> > > 	nard-owner at arbetsmyra.dyndns.org
> > >
> > > When replying, please edit your Subject line so it is more specific
> > > than "Re: Contents of Nard digest..."
> > >
> > >
> > > Today's Topics:
> > >
> > >    1. Re: Nard Digest, Vol 25, Issue 1 (Michiel Schriever)
> > >    2. Re: Nard Digest, Vol 25, Issue 1 (Ronny Nilsson)
> > >
> > >
> > > ----------------------------------------------------------------------
> > >
> > > Message: 1
> > > Date: Fri, 11 Nov 2016 15:49:07 +0100
> > > From: Michiel Schriever <m.schriever at tendrissolutions.nl>
> > > Subject: Re: Nard Digest, Vol 25, Issue 1
> > > To: <nard at arbetsmyra.dyndns.org>
> > > Message-ID: <1478875747.3461.0 at mail.tendrissolutions.nl>
> > > Content-Type: text/plain; charset="utf-8"; format=flowed
> > >
> > > Hi Ronny,
> > >
> > > It is indeed the network functionality, it doesn't show up anymore in
> > > the scan. I don't know for sure if the led is "slowly" flashing, it
> > > looks a lot like the error flashes you get with the raspbian image if
> > > there is something wrong, except that it keeps on flashing.
> > > I'll try to connect a led to some GPIO and try to make it flash with
> > > pigpio. I'll report back later.
> > >
> > > With kind regards,
> > > Michiel